Clean Room man lifts are designed for environments that require minimal particulate emissions such as the aerospace, computer and film processing industries.  These industries have controlled environments and require specific "non-emitting" features for any equipment operated in the Clean-Room.  The following are several standards that specify requirements for Clean Rooms:

• Federal Standard 209

• ISO 14644

• NSF No/ 49

• IES Standards

Clean Room ratings are based on concentration limits (Particles per cubic meter).  typical ratings are 10, 100,  1000, 10,000 and 100,000 with the larger the number resulting in more particles or "dirtier air".

View PDF brochure A65CR

View Video A65CR  (10Meg)

• Platform Height (Raised) 100ft

• Platform size (nominal) 5.0 x 5.0 ft

• Platform capacity (Unrestricted) 750 lbs

• Horizontal Reach 46ft

• Gross Weight 42,500 lbs

The A80JE was built for an aerospace Manufacture, and will be used in a 100,000 clean Important features include:

• 750 Amp-Hour Battery

• On-Board charger

• Same JLG Upper & Lower Controls

• Drive While Charging Capability

• 80' Platform Height

• 1.5 MPH Drive Speed

MLE was recently contacted by a prominent Aerospace company that develops space and satellite systems.

The problem was their existing Diesel Powered Genie Lift which emitted diesel exhaust was a problem for their intricate Aerospace components. The Engine was removed and replaced with a 48v DC Electric motor. All the controls operate exactly as original. A large 650 Amp-hour battery was also installed to provide extended operation.

This is a typical "Electric Package" that we provide for modifying existing combustion engine powered lifts for Clean room applications

View PDF brochure Z6034E

View PDF Brochure 1872CR

View Video 1872CR

The 1872CR scissor lift was designed for use in a Clean Room.  The lift is equipped with Full 90° Side Steering and completely removable side rails with a fall protection system.  The accordion style cover completely encloses the arm stack