|
Z30/22 Rail Road |
|
|
|
| The Genie
model Z30/22 was modified for operation on rails. Specialized wheels were
custom made along with rail couplers and unique drive system components. The
machine can be operated just like the wheeled versions including driving
when elevated. |
|
 |
|
|
TL50 Tower Lift |
 |
 |
 |
The TL50
was developed for use on a stage at the worlds largest casino. It includes
the following:
- Seven Stage Telescoping Boom
- Battery Powered and AC Power
- Articulating Boom to fit in elevator (and shipping)
- 4 Wheel Steering
- 750# Capacity
- Very Low Floor Contact Pressure
- 4 foot Extending Deck
Extensive Finite Element Analysis was performed to develop the lightest
structure possible yet guard against structural failure and local buckling. |
|
| TL34
Tower Lift |
 View
PDF brochure TL34 |
 |
|
The TL34 was custom designed
specifically for doing masonry repair in a steel mill exhaust tower. The
guard rails can be opened for loading 2500# pallets of masonry brick using a
forklift. The controls have a protective cover to withstand falling debris.
Features include the following:
|
|
|
TL35 Tower Lift
View PDF Brochure TL35 |
The TL35 was designed for
use in a powder metal manufacturing facility. It required a low stowed
height to fit under a door yet raise 750# to a height of 35 feet. Features
include the following:
-
750 lb (340 kg ) Capacity
-
35 ft (10.7 m) Platform height
-
AC Power
-
Rigid 7-Section Telescopic boom
-
Removable Rails
-
Drive and Steer from Ground Controls
-
Handheld Control Pendant
-
Rugged Design for Industrial Use
-
Ideal for use on Stages, in Theaters, Churches and Industrial Settings
|
 |
|
|
AL4026
View PDF brochure of
Custom Lift AL4026
Video: AL4026 Configurations |
 |
 |
|
The AL4026 was developed for maintaining an Ore
Dock for rail cars that loaded ore into ships. The dock had many pulleys and
counterweights that would control shoots for offloading the ore onto the
ships. The critical design requirements include the need to operate down a
100 yard isle way that was 8 feet wide yet rotate the platform and raise up
20 feet before extending out over a lattice structure of beams and columns.
The up-and-over requirements exceeded any articulating boom design currently
available. The lift structure consisted of 2 separate 3 stage boom
assemblies. |
|
| 1872CR
View PDF Brochure
1872CR
Video:
Scissor Lift with Full 90° Side Steering
|
Man Lift Engineering designed and produced the
1872CR for use in a Clean
Room Environment. The 1872CR features a platform height of 18-feet,
fully enclosed arm stack, 3-foot side shifting deck, removable rails on deck
extension with anti-fall protection and full 90° side steering. |
|
Call us with your specific custom Man or
Material Lift requirements for a free quote. |
