|
|
|
|
Atrium
Manlifts are designed for buildings such as hotels, malls, airports, churches,
casinos or specialized
buildings with high ceilings or difficult to reach windows and obstructions.
Typical applications include the following:
- Building Maintenance
- Window Washing
- Stage Preparation
- Ornamental Installation
|
|
T7535 Atrium - (Replaces Denka DL25N older technology) |
 |
The New T7535and T7545 Atrium provides superior reach and capacity than the
competition. Designed with significant input from building maintenance
professionals that identified the frustrations of existing equipment and
identified key important features such as the following:
- Full 35' of Side Reach - T7535
- Full 45' of Side Reach - T7545
- 75' Platform Height
- Fits Through Single Door
- Low Floor Contact Pressure
- Ease of Setup and Control
- Display Panel at Ground & Platform
View
PDF brochure
T7535
View
PDF brochure
T7545 |
|
|
A65TD Atrium |
 The A65TD Track Drive Atrium, is designed
to fit through a standard 36" door, provides
excellent reach and height capability.
- 62'' Platform Height
- 30' Side Reach
- Fits Through standard 36" Single Door
- Light Weight
View PDF brochure
A65TD |
T5425 Atrium |
 The New T5425 Atrium is designed
to fit into small freight elevators 12' long yet provides
excellent reach and height capability.
- 54'' Platform Height
- 25' Side Reach
- Fits into 12' Long Freight Elevator
- Fits Through Single Door
- Light Weight
View
PDF brochure
T5425 |
|
|
TL50 Tower Lift |
 View
PDF brochure TL50 |
 |
The TL50
was developed for use on a stage at the worlds largest casino. It includes
the following:
- Seven Stage Telescoping Boom
- Battery Powered and AC Power
- Articulating Boom to fit in elevator (and shipping)
- 4 Wheel Steering
- 750# Capacity
- Very Low Floor Contact Pressure
- 4 foot Extending Deck
|
|
| TL34
Tower Lift |
 View
PDF brochure
TL34 |
 |
|
The TL34 was custom designed
specifically for doing masonry repair in a steel mill exhaust tower. The
guard rails can be opened for loading 2500# pallets of masonry brick using a
forklift. The controls have a protective cover to withstand falling debris.
Features include the following:
|
|
|
TL35 Tower Lift
View PDF Brochure
TL35 |
The TL35 was designed for
use in a powder metal manufacturing facility. It required a low stowed
height to fit under a door yet raise 750# to a height of 35 feet. Features
include the following:
-
750 lb (340 kg ) Capacity
-
35 ft (10.7 m) Platform height
-
AC Power
-
Rigid 7-Section Telescopic boom
-
Removable Rails
-
Drive and Steer from Ground Controls
-
Handheld Control Pendant
-
Rugged Design for Industrial Use
-
Ideal for use on Stages, in Theaters, Churches and Industrial Settings
|
 |
|
